Newbie looking for housing ideas - Post pics of your bunnies' space!

Rabbits Online Forum

Help Support Rabbits Online Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I'm pretty proud of my cage :biggrin:
P1010559640x480.jpg

P1010566640x480.jpg

P1010564640x480.jpg

Good luck! Its a lot of fun!
 
Sure did. I used NIC cubes, zip ties, plywood, vinyl tiles & coroplast. Decorated with rugs, blankies and litter boxes everywhere. Total cost was about $100 :)
 
I use cages in my barn for 3 of my rabbits, and then there's a hutch for my rabbit pockets, which is outdoors, next to the barn, in the shade Good luck :)
 
I peeked at your blog. She is a lucky bunny! Did the shipping cost a lot?

I think I would rather buy than build, but I'll bet my husband would prefer the opposite!
 
Don't be intimidated by the NIC cages. They really are easy to do. You just use zip ties to connect the grids. Here are a couple sites that show you how. But you don't have to do the floor exactly the same. You can see from the photos on this site that people have used a variety of different floorings.
http://breyfamily.net/bunnycage.html

[ame=http://www.youtube.com/watch?v=4bLUDLbZYr4]http://www.youtube.com/watch?v=4bLUDLbZYr4[/ame]


Maybe you'll get lucky and hubby will see the video and say "Hey, I can do that!":biggrin:


 
Here is the cage that I built today. Here it is with the doors open.
2012-08-12_19-28-46_232.jpg

And with the doors closed.
2012-08-12_19-28-17_436.jpg
It is a devided 3.5x2x2. (the devidor will be taken out once the bunnies bond.)
 
I bought a sheet of Coroplast at Home Depot. It cost $12 counting tax. It comes in sheets that are 4'x8'. I found it next to the plexy glass (that is close to the lumber section at my home depot).
 

Latest posts

Back
Top