Rabbit of the Month - Sophie

Rabbits Online > Pet Rabbit Discussion > Housing and Environment > Building a cage out of PVC piping




Reply
 
LinkBack Thread Tools Display Modes
Old 02-21-2011, 04:50 AM   #1
Nitis3334
 
Nitis3334's Avatar
 
Join Date: Feb 2011
Location: Pilot Mountain, North Carolina, USA
Posts: 51
Default

So I'm planning on building a cage for my 2 Flemish Giants, they are going to be staying inside in my bedroom with me. The dimensions for the cage is going to be 3' x 8' and 4' high. The thing is that I will be making the frame out of PVC piping, and I'm just wondering if anyone has an idea of how this will hold up to chewing? A few years ago I talked with a rabbit rescue that uses PVC pipe to run electrical wires through so rabbits can't chew them. Would they be able to eventually get through long term? I plan on adding a lot of toys and chew blocks to keep them distracted. Also, I plan on making the shelves out of plywood, I figure I can always easily replace them if they are chewed. Anyone have any suggestions on something better I can make the shelves out of? Or recommend any specific type of wood that would be best? I know to avoid cedar, but when I was looking at wood at the store, for the most part they don't say what type of wood they are made of. Also, do you guys think I should add ramps for the shelves or would the rabbits probably be able to hop up without them? I don't want to take away to much cage space building ramps. I drew up a draft of the design plan, nothing is definite yet, I wanted to get some opinions on the idea. Any suggestions are welcome Thanks!





__________________
Nitis3334 is offline  
 
Reply With Quote
Old 02-21-2011, 05:55 PM   #2
tamsin
 
tamsin's Avatar
 
Join Date: Jun 2006
Location: , , United Kingdom
Posts: 966
Liked 33 Times on 24 Posts
Likes Given: 1

Default

It should hold up as well as wood, maybe better as it won't smell tasty. Try to fit the mesh on the inside of the cage and that should give you some protection.

I wouldn't bother with ramps unless your buns have mobility issues, a step takes up less room if the have trouble jumping. Something like an unturned box that doubles as a hidey hole.

For the size your building (and wow great size), another option would be just going for a metal pen rather than building frame. You could use a low table (or build the equivalent) to make the extra levels which would be nice and sturdy for buns that weight.



__________________
tamsin is offline  
 
Reply With Quote
Old 03-10-2011, 02:10 AM   #3
NorthernAutumn
Autumn - Administrator
 
NorthernAutumn's Avatar
 
Join Date: May 2008
Location: London / North Bay, Ontario, Canada
Posts: 5,828
Liked 96 Times on 77 Posts
Likes Given: 182

Default

How did your project turn out?

__________________

"Conscience is our magnetic compass; reason, our chart." - Joseph Cook
NorthernAutumn is offline  
 
Reply With Quote
Old 03-17-2011, 01:36 AM   #4
Nitis3334
 
Nitis3334's Avatar
 
Join Date: Feb 2011
Location: Pilot Mountain, North Carolina, USA
Posts: 51
Default

I'm still working on it, I have most of the frame built. I put sections of it together outside with a PVC glue, but the problem I'm running into is once put together it would be to big to bring through the door in my room. I need to find a good glue that will work on PVC pipe that will not have the vapors that the PVC glue I'm using has, I'm afraid it would be harmful to the bunny boys. I'll post a picture of what it looks like so far. I did also have to cut the 3 foot width to a 2.5 foot because i had almost no room between my bed and the cage. Once I built it the 4 feet high I couldn't believe how tall it really is, so I'm scrapping the shelves on each side and just going to put in a second floor, I'll use a wire floor, but cover it with wood that I can simply take out for cleaning or replacing. I'm going to have to build a ramp up to the 2nd floor, probably out of wood and add little wood bars for them to get some traction when climbing up. I have so many plans, just need to get the time. I sort of feel bad for the bunny boys, I've only been letting them out 2 hours a day. I've been thinking of letting them run around outside once the weather warms up in my dogs pen, but I'm a bit afraid of them digging out. It's a 15'x15' pen, I would probably have to cover the bottom 3 feet of the cage with smaller wire so they don't get out.

One more thing. Is there anything that my rabbits can catch from my dogs? The dogs are up to date with shots and stuff, but I'm not sure if they could be still a carrier of something that could be harmful if I let them out in my dog pen (dogs will not be out there when bunnies are).

__________________
Nitis3334 is offline  
 
Reply With Quote
Old 04-11-2011, 06:31 PM   #5
Dulmit
 
Join Date: Aug 2010
Location: Ware, Massachusetts, USA
Posts: 152
Default

When I build PVC stuff I usually glue the key pieces and simply drill holes and use zip-ties for the rest. Basically put the pieces together, drill a hole straight through and runa ziptie through that. the pieces stay together and I can cut the zipties when I need to move.

__________________
Dulmit is offline  
 
Reply With Quote
Old 04-11-2011, 07:31 PM   #6
LindyS
 
LindyS's Avatar
 
Join Date: Mar 2011
Location: Breaux Bridge, Louisiana, USA
Posts: 482
Default

I want pics when your done!

__________________
LindyS is offline  
 
Reply With Quote
Old 04-12-2011, 01:55 AM   #7
Nancy McClelland
Larry
 
Nancy McClelland's Avatar
 
Join Date: Jul 2007
Location: Las Vegas, Nevada, USA
Posts: 13,664
Liked 452 Times on 375 Posts
Likes Given: 423

Send a message via Yahoo to Nancy McClelland
Default

Definitely need to see pictures.

__________________

Sometimes I feel like I'm running a fertilizer factory.

Nancy McClelland is offline  
 
Reply With Quote
Old 05-31-2011, 02:27 AM   #8
bunnycarrot1
 
bunnycarrot1's Avatar
 
Join Date: Nov 2007
Location: worcester, Massachusetts, USA
Posts: 48
Likes Given: 6

Default

Pictures please

__________________
bunnycarrot1 is offline  
 
Reply With Quote
Old 06-01-2011, 06:33 PM   #9
Violet23
 
Violet23's Avatar
 
Join Date: Aug 2009
Location: Spruce Grove, Alberta, Canada
Posts: 511
Default

Done yet? I really wanna see what a PVC cage looks like

__________________
Violet23 is offline  
 
Reply With Quote
Old 06-01-2011, 06:37 PM   #10
Must_Love_Pets
 
Must_Love_Pets's Avatar
 
Join Date: May 2011
Location: Willow Glen, California, USA
Posts: 600
Liked 2 Times on 2 Posts

Default

Me too!!!!
Are ya done yet? LOL

I wish I could keep my buns indoors.



__________________
Must_Love_Pets is offline  
 
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On